https://www.trictools.com/product_category/bursting-heads/ Recent content in Bursting Heads on TRIC Tools | Trenchless Sewer Repair & Pipe Bursting Equipment Hugo -- gohugo.io en-us Thu, 19 Nov 2015 21:59:00 +0000 https://www.trictools.com/products/tric-lock-4-inch/ Thu, 19 Nov 2015 21:59:00 +0000 https://www.trictools.com/products/tric-lock-4-inch/ The 4-inch TRIC-Lock head attaches directly to an open end of 4-inch SDR17 pipe, and requires no PE cap or fusion to the new HDPE pipe. The head assembly is pulled by a 3/4” cable (optional 5/8” cable) with an open shackle termination. The pulling eye of the head assembly hinges on the shackle-pin, facilitating tight entry situations. https://www.trictools.com/products/8-inch-standard/ Thu, 19 Nov 2015 21:57:00 +0000 https://www.trictools.com/products/8-inch-standard/ The 8-inch standard head pulls a PE cap or pipe-end, which is fused onto the new HDPE pipe. The head assembly is pulled by a swaged cable (7/8”, 1”, 1.125”, or 1.25”) with a 2” x 4.5 TPI stud termination. The PE driver is also the head driver. The new standard 8-inch mole has a narrow 3-inch diameter nose, and three removable staggered blades. https://www.trictools.com/products/6-inch-standard/ Thu, 19 Nov 2015 21:56:00 +0000 https://www.trictools.com/products/6-inch-standard/ The 6-inch standard head pulls a PE cap or pipe-end, which is fused onto the new HDPE pipe. The head assembly is pulled by a 3/4” cable with an open shackle termination. The pulling eye of the head assembly hinges on the shackle-pin, facilitating tight entry situations. https://www.trictools.com/products/6-inch-tl/ Thu, 19 Nov 2015 21:55:00 +0000 https://www.trictools.com/products/6-inch-tl/ The 6-inch TRIC-Lock head attaches directly to an open end of 6-inch SDR17 pipe, and requires no PE cap or fusion to the new HDPE pipe. The head assembly is pulled by a 3/4” cable with an open shackle termination. The pulling eye of the head assembly hinges on the shackle-pin, facilitating tight entry situations. https://www.trictools.com/products/4-inch-standard/ Thu, 19 Nov 2015 21:54:00 +0000 https://www.trictools.com/products/4-inch-standard/ The 4-inch standard head pulls a PE cap or pipe-end, which is fused onto the new HDPE pipe. The head assembly is pulled by a 3/4” cable (optional 5/8” cable) with an open shackle termination. The pulling eye of the head assembly hinges on the shackle-pin, facilitating tight entry situations.